<span id="xrjmc"></span>

<button id="xrjmc"></button>
<th id="xrjmc"></th>
    1. 
      
    2. <em id="xrjmc"></em>

        你現在的位置:首頁>企業動態>

        解析打膠機打膠不滿的問題

        瀏覽:
        雙組份打膠機在打膠過程中可能會遇到各種各樣的問題,今天我們就專門針對雙組份打膠機打膠過程中,打膠不飽滿的問題來進行解析。
        The two-component gluing machine may encounter various problems during the gluing process. Today, we will analyze the problem of insufficient gluing during the gluing process of the two-component gluing machine.
        一、打膠速度導致雙組份打膠機打膠不飽滿:
        1、 The gluing speed causes the two-component gluing machine to be not full:
        雙組份打膠機作為設備,很多問題都具有共通性。調整打膠速度是很多中小玻璃加工企業的必備選擇,為了加快自己的生產節奏,追趕自己的工期,所以會將雙組份打膠機的打膠速度調快。
        As a equipment, many problems of two-component gluing machine are common. Adjusting the gluing speed is a necessary choice for many small and medium-sized glass processing enterprises. In order to speed up their own production rhythm and catch up with their own construction period, the gluing speed of the two-component gluing machine will be adjusted faster.
        隨著被調快的速度,很多打膠問題就不可避免地出現了。打膠速度人為調整的過快,導致膠體還沒有完全達到合格標準機頭就已經移動到下一個位置進行打膠操作了。所以就會出現雙組份打膠機在打膠過程中出現的打膠不飽滿的問題。
        As the speed is adjusted faster, many problems of gluing inevitably appear. The gluing speed is manually adjusted too fast, which causes the head to move to the next position for gluing before the colloid has fully reached the qualified standard. Therefore, there will be the problem that the two-component gluing machine is not full in the gluing process.

        雙組份打膠機

        雙組份打膠機打膠速度過快,導致打膠不飽滿的解決辦法:
        The two-component gluing machine is too fast, resulting in insufficient gluing solution:
        如果我們需要加快打膠的速度,調整了打膠機的移動參數的話,那么我們對應的也應該對供膠系統也進行相應的設置,比如這時候我們就需要加大供膠壓力,增大打膠機的出膠速度來配合對象的移動速度的增加。如果我們僅僅是單獨的增加了打膠機的移動速度而沒有對壓力進行調節的話就很有可能出現打膠不飽滿的情況發生。
        If we need to speed up the gluing speed and adjust the movement parameters of the gluing machine, we should also set the glue supply system accordingly. For example, at this time, we need to increase the glue supply pressure and increase the glue output speed of the gluing machine to match the increase of the movement speed of the object. If we only increase the moving speed of the gluing machine without adjusting the pressure, it is likely that the gluing is not full.
        二、供膠壓力的不足導致雙組份打膠機打膠不飽滿:
        2、 Insufficient glue supply pressure leads to insufficient glue application of two-component glue applicator:
        我們知道雙組份打膠機在打膠過程中,要靠壓力將雙組份硅酮膠擠出來打膠。如果壓力太小的話,就會導致在打膠過程中,出膠過少打膠不飽滿。
        We know that the two-component silicone glue is squeezed out by the pressure during the process of the two-component gluing machine. If the pressure is too small, it will lead to too little glue and insufficient glue during the gluing process.
        這個時候我們就需要加大供膠壓力,增大打膠機的出膠速度來配合對象的移動速度的增加。如果我們沒有對壓力進行調節的話就很有可能出現打膠不飽滿的情況發生。這時候我們僅僅需要調整供膠壓力即可很好的解決這個問題的發生。
        At this time, we need to increase the glue supply pressure and increase the glue delivery speed of the glue applicator to match the increase of the moving speed of the object. If we do not adjust the pressure, it is very likely that the gluing is not full. At this time, we only need to adjust the glue supply pressure to solve this problem.
        其實關于雙組份打膠機出現的打膠不飽滿的問題,主要可能有以上幾種原因導致的,希望能對大家起到幫助。更多問題的了解就來我們網站http://www.101fashiontips.com咨詢看看吧。
        As a matter of fact, the problem that the two-component gluing machine is not full may be caused by the above reasons. I hope it can help you. For more information, please visit our website http://www.101fashiontips.com Let's consult.

        上一篇:打膠機工作完后中空膠固化慢的原因
        下一篇:自動打膠機分別配置多頭跟單頭的原因

        • 官方微信
        国产欧美日韩免费看AⅤ视频
        <span id="xrjmc"></span>

        <button id="xrjmc"></button>
        <th id="xrjmc"></th>
        1. 
          
        2. <em id="xrjmc"></em>